Inter-Tel

Inter-Tel Axxess / Inter-Tel Axxess 8000 Series / Inter-Tel Axxent / Inter-Tel Eclipse

*Program changes are required to be performed from any designated system administrator's telephone.

• While on-hook, dial 9800.

• Display shows [DATE (current date).]

  • If you do not need to change the date, press # to skip to the TIME.

  • Use the keypad to enter the month, day, and year.

    • Example: dial 010196 for January 1, 1996.

• Display shows TIME (current time).

  • If you do not need to change the time, press # twice to exit.

• Use the keypad to enter the time in hours and minutes.

  • Example: dial 0900 for 9:00.

• Select AM or PM. Press 1 for AM or press 2 for PM.
  

• Display shows [SYSTEM DATE AND TIME UPDATED].

Note: You may backspace to correct information by pressing MUTE or you may press * to cancel and leave it unchanged and start over.



IMX 612 / 1224 / 2460

*Programming changes must be performed at extension 100
Note: If you make a mistake while performing the following procedure, lift and replace the handset to start over, or press MUTE to backspace.

• While on-hook, press SPCL and dial 021.
• Display shows [SET TIME OF DAY}.
• Using the keypad, enter the time in hours and minutes. Then press * for AM or # for PM.
  • Example: 900* = 9:00 AM and 230# = 2:30 PM.
• Display shows [SET DATE MM-DD-YYYY].
• Use the keypad to enter the month, day, and year.
  • Example: 01011996 = January 1, 1996.
• Display shows [SET DAY OF WEEK SUN].
• Scroll through the day-of-week by pressing # to go forward or * to go backward. When the desired day is displayed, press SPKR to terminate programming. You hear a progress tone.

GLX Plus

* You must set the time on each display set.

 While on hook press SPCL and enter the feature code 4 - 1 then enter hour then min in 24 hour format, pick up and hang up the handset.