Mitel

Mitel SX-50
You should be at the Attendant Console to change the time.
To set date using a twelve hour clock

Press the FUNCTION key.
Dial 14.
-----"HHMM" flashes in display, asking you to enter the time.
Dial the time using a 24 hour format.
-----Example: 1:00 PM = 1300
Idle display sets should now show the time as set.

Mitel SX10 & SX20 

At the test extension or Console

1. dial *15 (24 hour)
2. Enter Time in 24 hour format HHMM
3. Press release
4. Dial *80
5. Enter Date DDMMYY
6. Press release

MITEL SX200
TO CHANGE THE TIME FROM THE ATTENDANT CONSOLE:

Press the FUNCTION key.
Press ATT FUNCTION.
Press SET TIME
-----The display will show "Enter Time (HH:MM)= *Enter the first 2 digits for the hour, the ":" will automatically be displayed, enter the next 2 digits for the minutes.
-----The display will show "Enter Time (HH:MM)=XX:XX (XX:XX= the current time.)
Press AM or PM.
----- AM or PM will only appear if the system is programmed for a 12 hour clock.
Press SET to enter the time as shown.
Press EXIT.




MITEL SX2000
TIME CHANGE NEEDS TO BE COMPLETED AT THE ATTENDANT CONSOLE.

Press FUNCTION .
Press ATT FUNCTION softkey. Press DATE/TIME softkey.
Press 12 HOUR softkey.
Press SET TIME.
-----(Enter the current time using four digits)
Press AM or PM softkey. Press EXIT softkey.


EXPRESS MESSENGER

Access the System Administrator mailbox.
Press 3 for DATE/BUSINESS HOURS menu. Press 1 to set system date and time.
Press # to skip date setting.
Enter current time HHMM.
-----(Use a 24 hour format)
Press the * key twice to exit mailbox.