NEC

NEC Aspire

To change time:
Note: Date can not be changed through the phone.
To Set Time:
Press the Call1 key.
Then press 828
Dial two digits for the hour (24) hour.

 

 

 

 

 

 

NEC  DS 1000 and 2000

1. Go to extension 300. (Usually the reception phone.
    Press 6 on any idle telephone and the extension number will appear in the display).
2. Press #TD (#83) for Time/Date.
3. Current time will appear in the display.
    Enter time in 24-hour clock using the following format:
    (HHMMSS) Hours (2 digits), Minutes (2 digits) and Seconds (2 digits)
4. Press HOLD
5. Current date will appear in the display.
    If the date is correct you may press HOLD then SPK to exit programming OR
    Enter date using the following format:
    (MMDDYYYY) Month (2 digits), Day (2 digits) and Year (4 digits)
6. Press HOLD then SPK.
 

NEC Elite/ Electra

Programming is done from first 2 station ports on system.

1.    Press FNC key  

2.    Dial 9

3.    Dial #

4.    Dial current time (e.g. 03:29)

5.    Press the RECALL key to toggle AM/PM

6.    Press the HOLD key to advance to the calendar

7.    Press the RECALL key to select the day of the week

8.    Press the # key to move the cursor to the day of the month setting

9     Enter the day by using the dial pad

10.  Press the RECALL key to select the month

11.  Press the # key to move the cursor to the year setting

12.  Enter the year by using the dial pad (only the last two digits are entered)

13.  Press the FNC key

 

NOTE:  if only setting the time, press the FNC key after making the changes

 

 

 

NEC PROFESSIONAL LEVEL I    &   NEC PROFESSIONAL LEVEL II

Press  FNC button
Dial 9 #
Enter the hour and minute by using the dial pad
Press RECALL button to change AM / PM setting
Press HOLD button to change to calendar settings
                                    or
             Press FNC button to exit

Press RECALL to select day of week
Press # to move the cursor to day of month field
Enter day of month by using dial pad
Press RECALL button to select month
Press # to move the cursor to the year field
Enter last two digits of  year by using dial pad.
Press FNC to exit

 

NEC  Electra 824

Press FNC button
Dial 9
Dial #
Note: Use # and * to move cursor to desired item to change
Press RECALL button to change AM/PM setting
Press HOLD button for calendar setting

 

 

 

NEC Mark II

This is done at the Attn station


1. Press CNF then *
2. Dial hour 00-23
3. Press DSS key 20
4. Dial minute 00-59
5. Press DSS key 20
6. Dial day of month 01-31
7. Press DSS key 20
8. Dial month using line key 1-12
9. Press DSS key 20
10.Dial year
11.Press ANS