Southwestern Bell

Southwestern Bell Landmark

IMOPORTANT... This is a multi-step process which involves entering administrator programming and then setting the date and time. Programming must be done from a professional display telephone.  The term "soft key" mentioned below refers to the buttons just below the LCD display.

  1. With the handset on-hook,  press Feature # * and your display will then prompt you for the pass code.
  2. Enter your pass code.  (The default pass code is 0 0 0 0 0 0).
  3. Press the SHOW soft key and the display will then read 1. SET
  4. Press the NEXT soft key 3 times until 4. RESOURCE appears in the display.
  5. Press the SHOW soft key.
  6. Press the  NEXT soft key 9 times until SYSTEM TIME appears in the display.
  7. Press the SHOW soft key and the year appears in the display.  
    (If you simply wish to change the hour for Daylight Savings Time, you may press NEXT repeatedly to bypass the YEAR, MONTH, DAY, and WEEKDAY, and skip directly to step 15).
  8. Press the CHG soft key followed by the 4-digit year.
  9. Press the SAVE soft key followed by the NEXT soft key and the month appears in the display.
  10. Press the CHG soft key to change the month.  This is a toggle changing process (JAN/FEB/.../DEC) followed by the SAVE soft key.
  11. Press the NEXT soft key and the 2-digit day will appear.
  12. Press the CHG soft key enter the 2-digit date followed by the SAVE soft key.
  13. Press the NEXT soft key and the weekday appears in the display (MON/TUE/.../SUN).  This is a toggle changing process followed by the SAVE soft key.
  14. Press the NEXT soft key and the 2-digit hour appears in the display.
  15. Press the CHG soft key and enter the 2-digit hour followed by the SAVE soft key.
  16. Press the NEXT soft key and the 2-digit minute appears in the display.
  17. Press the CHG soft key and enter the 2-digit minute followed by the SAVE soft key.
  18. Press the RLS button to exit programming.

Southwestern Bell FS246

IMPORTANT...  Time and date are set at the Master station (#20) only and the information is shown on all of the Executive stations on the system.  When setting or resetting of either Time or Date is required, always set both Time and Date.  NOTE:  Neither # nor * keys are used in programming Time and Date.

  1. Press the SET TIME key and the display will show HH-MM (Hour-Minute).
  2. Enter the 4 digit time and press the AM/PM key for PM only.  As an example, to enter 2:05 PM, press 0 2 0 5 and the AM/PM key.
  3. Press the SET TIME key and the display will now show the correct time on all executive phones.
  4. Press the ALARM key and your display will show MM-dd-YY (Month-Day-Year).
  5. Enter the 6 digit year and press the SET TIME key.  To see the date, press the DATE key or wait for a short time and the display will automatically return to Time.